Rear lower arm bolt, PN 90167-S30-000 - BOLT

Brozilla · Post by **Brozilla** » Sat Jul 25, 2020 11:37 am

DanishLuder wrote: ↑
Fri Jul 24, 2020 7:12 pm

vanzep wrote: ↑
Tue Jul 21, 2020 1:16 pm
Dont know if it is of any help but the 4th gen suspension bolts i have here are all 12mm diax83mm or longer - these are the ribbed ones
only 14mm dia bolt i can see is the camber adjustment bolts for 4ws but they are about 83mm long as well....

Those bolts, washers and nuts on the last picture, can I buy those?
Pretty sure thats the ones i desperately need!

These can be acquired both OEM and 3rd party, I purchased them a few weeks ago. Price is low too.

DanishLuder · Post by **DanishLuder** » Sat Jul 25, 2020 3:59 pm

vanzep wrote: ↑
Fri Jul 24, 2020 10:00 pm
sorry DanishLuder ive got to keep them for when i fit the new polybushed rear lcas and trailing arms
last time i went for a wheel alignment they could not adjust these bolts on one side as it was seized in the bush so camber is out 1 degree as a result

Fair enough.
I had to cut mine off to remove the whole assembly from the car. So am in need of new.
They just cost a ton buying from new.
£19 per bolt, £6 per washer and £10 or so for the nut....

DanishLuder · Post by **DanishLuder** » Sat Jul 25, 2020 4:00 pm

Brozilla wrote: ↑
Sat Jul 25, 2020 11:37 am

These can be acquired both OEM and 3rd party, I purchased them a few weeks ago. Price is low too.

Do you have a link to where to acqquire from 3rd party?

Brozilla · Post by **Brozilla** » Sat Jul 25, 2020 4:48 pm

Not really, I just went to the nearest car parts store and gave them the part number, they had them available the next day. A friend of mine actually got OEM studs in a local part store, while not specifically asking for it.

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Mon Jul 27, 2020 11:02 am

Brozilla wrote: ↑
Tue Jul 21, 2020 11:09 am
Thanks for the heads up, I am pretty sure a bolt on my CR-V is the same. CR-V one is not out of production.
I wanted to see if someone has an original one first. I guess I will order the CR-V one and see if it fits.

The part number you quoted doesn't cross-reference across to any other Honda I'm afraid.
If it did, it would be listed here, but it only shows Preludes;
https://www.parts-honda.uk/honda-cars/a ... 0167s30000

It would be very, very unusual for Honda to have another part with exactly the same dimensions/specs listed under another part number - they're extremely good at updating their parts catalogue and superceding part numbers.

Brozilla · Post by **Brozilla** » Mon Jul 27, 2020 1:49 pm

I have to disagree, there are lots of parts that can be used from Accords/Legends that are not listed as compatible with Preludes. For example, you cannot buy upper arm ball joints for Prelude, but they are identical as Legend (front) and Accord (back). Lower ball joints can also be used from Accord. I ordered CR-V bolts as they do look the same on schema and are used for similar purpose (but not the same, maybe that is why it isn't listed in your link). I will of course let you know of my findings once bolts are here.

Brozilla · Post by **Brozilla** » Sat Aug 22, 2020 11:08 am

I received the CR-V bolts from amayama and the do fit, yay

batkosio · Post by **batkosio** » Sat Jun 05, 2021 4:57 pm

From 5th gen., as I am in the same boat:

https://www.amayama.com/en/part/honda/90167s30000

robakop · Post by **robakop** » Tue Feb 07, 2023 10:29 am

Brozilla wrote: ↑
Sat Aug 22, 2020 11:08 am
I received the CR-V bolts from amayama and the do fit, yay

Could you write the partnumber for those CR-V bolts? Did it fit perfectly? I mean with washer diameter etc? Thanks a lot for information

Post by **Vtecmec** » Tue Feb 07, 2023 10:49 am

@Brozilla