Transferring myself over from the new members post.
Very happy to be ending the year with a MOT pass
Failed first time around on emissions. Talking to the garage they were giving it a full cat emissions test, but my understanding is that as a pre-95 import the BB4 model is not in the emissions standard book so should be given an easier emissions test. If anyone knows for sure I'd be interested to know.
Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<
>>> Click Here For Profile <<<
Tim's BB4
- wurlycorner
- Ye are glad to be dead, RIGHT?
- Posts: 21383
- Joined: Sat May 19, 2012 3:33 pm
- My Generation: 4G
- Location: Chelmsford, Essex
- Has thanked: 2257 times
- Been thanked: 282 times
Tim's BB4
Hi Tim
Good news on the pass.
That's correct - a BB4 should be tested to non-Cat emissions standard.
Good news on the pass.
That's correct - a BB4 should be tested to non-Cat emissions standard.
--
Iain.
Iain.
Super Secret 1G (not really super secret!)
-
- Posts: 13
- Joined: Sun Apr 07, 2019 8:22 pm
- My Generation: 4G
- Has thanked: 1 time
- Been thanked: 11 times
Tim's BB4
First breakdown of the year, the starter motor stuck with no advance warning. At least it was at home at the time. Looked accessible but the bottom bolt needed a big extension. When taking the expansion bottle off found the rubber tube was split and the plastic pipe was blocked, lucky to spot those at the same time. Then the battery retaining clamp was threaded, took one off a sleeping Hillman Avenger which fits nicely.
Come to use the car yesterday and the engine light came on almost immediately pass me a paperclip
Come to use the car yesterday and the engine light came on almost immediately pass me a paperclip
- JEBB4
- Supporter 2014
- Posts: 1239
- Joined: Tue Feb 18, 2014 7:28 pm
- My Generation: 5G
- Location: Australia
- Has thanked: 89 times
- Been thanked: 75 times
Tim's BB4
Nice work
What fault code did you get?
What fault code did you get?
My BB6 buildJamie P 2013 wrote:i like tits
viewtopic.php?f=17&t=54187
My BB2 build (yang)(WRITTEN OFF AND SOLD)
viewtopic.php?f=17&t=18866
My BB4 build (yin) (SOLD TO DRAX)
viewtopic.php?f=17&t=12087&hilit=JEBB4+ ... ty#p203321
-
- Posts: 13
- Joined: Sun Apr 07, 2019 8:22 pm
- My Generation: 4G
- Has thanked: 1 time
- Been thanked: 11 times
Tim's BB4
Code 41 was the new one. Thinking back, I topped up the clutch fluid right before it came on, I had a look to see if I disturbed any wiring but can't see anything obvious. Also have code 17 regularly as the speedometer connection drops.
- Drax
- Moderator
- Posts: 6314
- Joined: Wed Dec 22, 2010 4:05 pm
- My Generation: 4G
- Location: Wrexham, North Wales
- Has thanked: 23 times
- Been thanked: 412 times
Tim's BB4
error codes
kb/viewarticle?a=4
17 - VSS: Vehicle Speed Sensor - P0500 (circuit malfunction), P0501 (range/performance)
41 - Primary Oxygen Sensor Heater (HO2S) - P0135 (circuit malfunction), P1166 (system electrical), P1167 (system)
kb/viewarticle?a=4
17 - VSS: Vehicle Speed Sensor - P0500 (circuit malfunction), P0501 (range/performance)
41 - Primary Oxygen Sensor Heater (HO2S) - P0135 (circuit malfunction), P1166 (system electrical), P1167 (system)
2.2 JDM DOHC SI-VTEC LSD TCS 4WS ABS BB1 MANUAL 1992
FOR PAUL
FOR PAUL
-
- Posts: 1398
- Joined: Sat Aug 31, 2013 4:44 pm
- My Generation: 5G
- Location: Didcot
- Has thanked: 21 times
- Been thanked: 254 times
Tim's BB4
I have found that previously if the starter motor gets stuck on / doesn't disengage, it can play funny buggers with the voltage and make the car throw a few codes. If disconnecting the battery for an hour and a bit of driving doesn't clear any of the codes then it could well be true (whether caused by the starter issue or not - if you haven't driven the car much faults might just start to crop up coincidentally).
'00 UKDM 2.2VTI H22a8
'21 'e' Advance
'21 'e' Advance