Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<
>>> Click Here For Profile <<<
My Canadian 92 prelude
- rob quilter
- Supporter 2014
- Posts: 5331
- Joined: Mon Aug 09, 2010 1:40 pm
- My Generation: 5G
- PSN GamerTag: robquilter
- Location: Derby
Welcome aboard!
Nice Prelude you have there! Good to see plenty of work going into it.
Nice Prelude you have there! Good to see plenty of work going into it.
PERFORMANCE PARTS FOR JAPANESE CARS - http://WWW.TOKYOSQUAD.COM
FOLLOW US ON FACEBOOK - http://WWW.FACEBOOK.COM/TOKYOSQUAD
FOLLOW US ON FACEBOOK - http://WWW.FACEBOOK.COM/TOKYOSQUAD
- K30DPC
- LotM Winner
- Posts: 1105
- Joined: Fri Aug 09, 2013 7:45 am
- My Generation: 4G
- Location: GB/Poland
- Has thanked: 17 times
- Been thanked: 17 times
I was thinking about c pilar strut. How is it when you put passengers on the back? Can they seat normaly- how much room they have? Also can you help to get one as I've seen them only from states and usually sellers don't wanna post them outside USA
my BB1 UKDM
Re: My Canadian 92 prelude
Ive only had people sit in the back a couple of times. And they do not enjoy it.
This is the one I got
http://www.ebay.ca/itm/94-97-HONDA-ACCO ... 22&vxp=mtr
You would have to contact the seller and see if he/she would ship to Poland.
This is the one I got
http://www.ebay.ca/itm/94-97-HONDA-ACCO ... 22&vxp=mtr
You would have to contact the seller and see if he/she would ship to Poland.
- wurlycorner
- Ye are glad to be dead, RIGHT?
- Posts: 21383
- Joined: Sat May 19, 2012 3:33 pm
- My Generation: 4G
- Location: Chelmsford, Essex
- Has thanked: 2257 times
- Been thanked: 282 times
- mercutio
- LotM Winner
- Posts: 14958
- Joined: Sun Aug 08, 2010 8:45 pm
- My Generation: 5G
- Location: Sunny Manchester
- Has thanked: 1 time
- Been thanked: 3 times
- Contact:
welcome in buddy
bristol_bb4 wrote:ahhh a 5th gen, i love 5th gens
Dino wrote:I loves the 5th gen really.... just dont quote me on it...
4thgenphil wrote:Mines 4 1/4 unches mate, sorry
http://www.ludegeneration.co.uk/profile ... -t618.html
- Thebusofwoe
- Supporter 2014
- Posts: 2670
- Joined: Mon Mar 11, 2013 11:47 pm
- My Generation: 4G
- Location: Salisbury, Wiltshire
- Been thanked: 2 times
Sr-v What is this?? Is it similar to the cr-v?? Welcome in fella. . Also where you get them shifter cable bushes from? Cheers
One life, LIVE IT! Get VTEC, LOVE it. Drive a Honda and ENJOY it.
Build thread : http://www.ludegeneration.co.uk/profile ... t7849.html
Build thread : http://www.ludegeneration.co.uk/profile ... t7849.html
Re: My Canadian 92 prelude
SR-V is the fully loaded vtec version of the 4th gen prelude that was available in USA and Canada.
. In some countries, the Prelude with 2.2 VTEC engine was called the VTi-R. Later the 96 prelude SI/SR was introduced with a 2.3 VTEC engine. In Canada, the Si was called the SR, and the VTEC was called the SR-V.
And the shifter bushings are from a good friend. His website is http://shayspec.bigcartel.com/ He is busy with school right now, so his site is shut down until March 3rd. He makes these all himself and does an amazing job on them
Here is his facebook page https://www.facebook.com/shayspec
. In some countries, the Prelude with 2.2 VTEC engine was called the VTi-R. Later the 96 prelude SI/SR was introduced with a 2.3 VTEC engine. In Canada, the Si was called the SR, and the VTEC was called the SR-V.
And the shifter bushings are from a good friend. His website is http://shayspec.bigcartel.com/ He is busy with school right now, so his site is shut down until March 3rd. He makes these all himself and does an amazing job on them
Here is his facebook page https://www.facebook.com/shayspec