Hi all,
Just bought my first prelude, currently sitting as a stxnce cxr but looking to convert to a fast road set up. Also looking to put a H22A, A5, A7 or A8 in it so any info/links for a conversion are appreciated.
Looking forward to being part of the forum.
Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<
>>> Click Here For Profile <<<
New Member
- Vtecmec
- LotM Winner
- Posts: 5448
- Joined: Fri Aug 06, 2010 5:43 pm
- My Generation: 4G
- XBOX GamerTag: vtecmec
- Location: East Midlands
- Has thanked: 138 times
- Been thanked: 406 times
New Member
Hi and welcome.
I assume it's a 2 litre at the moment? Upgrading to vtec is pretty simple, just swap the engine, change the ECU and add a wire for vtec. Obviously upgrading the brakes should be on the list to compliment the swap.
I assume it's a 2 litre at the moment? Upgrading to vtec is pretty simple, just swap the engine, change the ECU and add a wire for vtec. Obviously upgrading the brakes should be on the list to compliment the swap.
- Drax
- Moderator
- Posts: 6314
- Joined: Wed Dec 22, 2010 4:05 pm
- My Generation: 4G
- Location: Wrexham, North Wales
- Has thanked: 23 times
- Been thanked: 412 times
New Member
good to see you here!! keep us up to date with any other plans, questions etc.
2.2 JDM DOHC SI-VTEC LSD TCS 4WS ABS BB1 MANUAL 1992
FOR PAUL
FOR PAUL
New Member
Yep currently a 2 litre F20A4. Good to hear it's so easy. I'll more than likely change the box too. I don't have the specs on the ratios but I imagine the f20 gearbox won't be very fun with the H22.
Are there any write ups you know of detailing what I would need? Engine mounts, drive shafts, gear linkages etc? If so I'd really appreciate it.
Thanks
-
- Posts: 1398
- Joined: Sat Aug 31, 2013 4:44 pm
- My Generation: 5G
- Location: Didcot
- Has thanked: 21 times
- Been thanked: 254 times
New Member
Welcome to the forum. I'd try to pick up a whole donor car - that way you will have everything you need plus more.
'00 UKDM 2.2VTI H22a8
'21 'e' Advance
'21 'e' Advance
- Vtecmec
- LotM Winner
- Posts: 5448
- Joined: Fri Aug 06, 2010 5:43 pm
- My Generation: 4G
- XBOX GamerTag: vtecmec
- Location: East Midlands
- Has thanked: 138 times
- Been thanked: 406 times
New Member
I ran a 2.0 litre box in mine as part of the auto manual swap I did years ago, it was alright really, though if you could get a vtec lsd gearbox, that would be best.
The gearboxes are interchangeable too, so anything h or f series will fit (not ATTS!) and you don't have to worry about any of the peripherals.
The gearboxes are interchangeable too, so anything h or f series will fit (not ATTS!) and you don't have to worry about any of the peripherals.