4ws Alignment locking pins (now on page 11)

Post by **Drax** » Tue May 19, 2020 4:38 pm

Ok, i've been to Demon Tweeks today for my 2nd round of 4WS tracking and they successfully used the 4WS locking pin i had made.

They go in here (snip from 4g service manual)

and they work for 4g & 5g's, not 3g's sorry.

£60 posted (within UK only - it may cost a little more to send worldwide but i'm happy to post anywhere). pm me if you'd like one.
currently 4x available. if i sell all of them then ill get more made

DanishLuder · Post by **DanishLuder** » Mon Jul 27, 2020 7:09 pm

Drax wrote: ↑
Tue May 19, 2020 4:38 pm
Ok, i've been to Demon Tweeks today for my 2nd round of 4WS tracking and they successfully used the 4WS locking pin i had made.

They go in here (snip from 4g service manual)

What exactly would I need this for?

Would I need it if I have removed the whole 4WS assembly for refitting and etc?
Or would my alignment guy need it once I get it aligned?

Cheers, Ben

Post by **Drax** » Mon Jul 27, 2020 9:46 pm

its just for the alignment part, they can align the wheels without it to a certain degree but to do a proper job and 100% get it correct, one of these locking pins is essential

DanishLuder · Post by **DanishLuder** » Tue Jul 28, 2020 11:32 am

Drax wrote: ↑
Mon Jul 27, 2020 9:46 pm
its just for the alignment part, they can align the wheels without it to a certain degree but to do a proper job and 100% get it correct, one of these locking pins is essential

Alright, thanks for the response.
Will most likely need one in the near future, when I get the car pieced back together.
I will hit you up then!

Post by **Vtecmec** » Tue Jul 28, 2020 2:05 pm

Get one now if you will need it in the future, these things may not be available again.....

Post by **Drax** » Tue Jul 28, 2020 4:20 pm

DanishLuder wrote: ↑
Tue Jul 28, 2020 11:32 am
Alright, thanks for the response.
Will most likely need one in the near future, when I get the car pieced back together.
I will hit you up then!

sure thing no problem!

Vtecmec wrote: ↑
Tue Jul 28, 2020 2:05 pm
Get one now if you will need it in the future, these things may not be available again.....

if i sell all the ones i have, ill get more made dont worry

MrCopyright · Post by **MrCopyright** » Sun Aug 23, 2020 7:15 pm

Drax wrote: ↑
Tue May 19, 2020 4:38 pm
not 3g's sorry

Any chance to have 3rd gen locking pin made

Post by **Drax** » Mon Aug 24, 2020 8:37 am

MrCopyright wrote: ↑
Sun Aug 23, 2020 7:15 pm
Any chance to have 3rd gen locking pin made

if i could get hold of the dimensions of an original, or even hold of one i could get it made - have you tried Honda themselves? unlikely i know

wllm · Post by **wllm** » Wed Sep 22, 2021 9:44 pm

Is there still one available? Would like to have one to get my 4ws aligned properly.

Post by **Drax** » Thu Sep 23, 2021 9:15 am

wllm wrote: ↑
Wed Sep 22, 2021 9:44 pm
Is there still one available? Would like to have one to get my 4ws aligned properly.

hi wllm, i need to get another batch made - leave it with me and as soon as i get some more i'll give you a shout.