Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.

>>> Click Here For Profile <<<

Image

Inner and Outer Rear 4WS track rod ends

Chassis/Brakes/Steering/Wheels discussion
Post Reply
User avatar
chris_rd92
Posts: 123
Joined: Thu Jun 27, 2019 3:42 pm
My Generation: 5G
Has thanked: 33 times
Been thanked: 8 times

Inner and Outer Rear 4WS track rod ends

Post by chris_rd92 » Wed Jul 24, 2024 3:33 pm

Hi guys,

So I've always suspected that my rear track rods are on the way out as I have a little bit of play on the off-side inner joint by the steering rack, however I have just failed my MOT today due to play in the off-side OUTER track rod end. (Apparently)

For piece of mind I'd like to replace both, however these are obviously discontinued now. I know people use Vecta track rod ends for the outer joints, but at about the inner joints? Admittedly I'm very unfamiliar with this area of my car.

I also need to get this sorted asap as it's my daily driver, and I also need to source a new front steering gator apparently! Car is a 1997 5th gen 2.2VTI manual 4WS bb6

Cheers!
Chris

User avatar
Merlin
Moderator
Posts: 12337
Joined: Fri Aug 06, 2010 9:04 am
My Generation: 5G
PSN GamerTag: Merlinbadman
Location: Edinburgh
Has thanked: 56 times
Been thanked: 230 times

Inner and Outer Rear 4WS track rod ends

Post by Merlin » Wed Jul 24, 2024 3:53 pm

If it's a 4WS car it will be a BB8 ;)

The inner rod end part number is 53020-ss0-000 but not sure if these are available anywhere.
Image
BA8......... BB4......... BB8.........The JDM Muscle Bus

User avatar
chris_rd92
Posts: 123
Joined: Thu Jun 27, 2019 3:42 pm
My Generation: 5G
Has thanked: 33 times
Been thanked: 8 times

Inner and Outer Rear 4WS track rod ends

Post by chris_rd92 » Wed Jul 24, 2024 3:57 pm

Merlin wrote:
Wed Jul 24, 2024 3:53 pm
If it's a 4WS car it will be a BB8 ;)

The inner rod end part number is 53020-ss0-000 but not sure if these are available anywhere.
Yes you're right I should have remembered that! I even have a bb8 sticker on the dashboard (star wars reference 😂).

User avatar
vanzep
Supporter 2016
Posts: 7048
Joined: Sun Jan 29, 2012 6:38 pm
My Generation: 4G
Location: Edinburgh
Has thanked: 274 times
Been thanked: 450 times

Inner and Outer Rear 4WS track rod ends

Post by vanzep » Wed Jul 24, 2024 8:29 pm

Plenty of info in this recent thread:
viewtopic.php?f=6&t=24877
1996-2000 1993 EG9 Blue Civic 1.6 Vti - Traded in against the BB4
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD

2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC

User avatar
RattyMcClelland
Moderator
Posts: 9204
Joined: Wed Aug 04, 2010 10:02 pm
My Generation: 5G
PSN GamerTag: RattyMcClelland
Location: Leicestershire
Been thanked: 193 times

Inner and Outer Rear 4WS track rod ends

Post by RattyMcClelland » Wed Jul 24, 2024 9:44 pm

I linked you to the ones on ebay japan on facewank but if you need them ASAP you'll have to go to a scrapper and find a 2nd hand set.
Unless someone has a spare lying around they can sell.
Image

User avatar
chris_rd92
Posts: 123
Joined: Thu Jun 27, 2019 3:42 pm
My Generation: 5G
Has thanked: 33 times
Been thanked: 8 times

Inner and Outer Rear 4WS track rod ends

Post by chris_rd92 » Tue Jul 30, 2024 10:52 am

Thanks for the help guys, in the end someone offered me a full second hand rear steering rack with inner and outer joints included. I grabbed that, and then also bought the new Vecta track rod ends just in case.

Post Reply

Return to “Chassis / Brakes / Steering / Wheels”