4WS to 2WS Conversion Question

K4MR411 · Post by **K4MR411** » Mon Aug 13, 2012 10:18 am

Im planning on doing the conversion this week. I've gathered the parts i need, but one question remains.
The bolts that hold the 4WS subframe in place, can these be used for the 2WS subframe?

vtectom · Post by **vtectom** » Mon Aug 13, 2012 11:12 am

This will help you;

http://preludeuk.forumup.com/viewtopic. ... =preludeuk

Post by **4thgenphil** » Mon Aug 13, 2012 11:15 am

yes to your question, on a 4th gen anyway!

Post by **Merlin** » Mon Aug 13, 2012 12:36 pm

I would buy new lower arm and toe arm nuts and bolts. The adjustment plates may be able to be reused although some come attached to the bolt.

K4MR411 · Post by **K4MR411** » Mon Aug 13, 2012 10:11 pm

Thanks Guys. I'll get started on the conversion this Thursday

spudep91 · Post by **spudep91** » Tue Aug 14, 2012 9:39 am

Would u make a how to on the converion pal with pics as u do it would be helpfull for my future plans

K4MR411 · Post by **K4MR411** » Wed Aug 15, 2012 11:33 pm

I would have made a how to guide, but im working on thursday unfortunately so my brother will be doin the conversion during the day. I'll ask him to take a few snaps but i told him to follow the link vtectom posted, which is quite helpful.

Here the link: http://preludeuk.forumup.com/viewtopic. ... =preludeuk

K4MR411 · Post by **K4MR411** » Fri Aug 17, 2012 6:42 pm

Could someone quickly tell me if the 5th gen and 4th gen rear Lower Control Arms the same?

vtectom · Post by **vtectom** » Fri Aug 17, 2012 11:23 pm

check if the part numbers are the same;

http://www.lingshondaparts.com/honda_ca ... d_01=22950