Hi after some help. My 4th gen prelude has been sat for a while and now won't start. It started briefly then the gauges went off and the car cut out at the same time and won't restart .
The temperature gauge / fuel gauge and clock all went off and are now not lighting up .
Has anybody had this before .
Cheers jon
Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<
>>> Click Here For Profile <<<
No temp/fuel gauge and clock
- si import
- Supporter 2016
- Posts: 1253
- Joined: Sun Jan 29, 2012 4:47 pm
- My Generation: 4G
- Location: Essex
- Has thanked: 2 times
- Been thanked: 23 times
No temp/fuel gauge and clock
http://www.ludegeneration.co.uk/profile ... t4910.html
BB4 Si Vtec LSD . 263.4 bhp - 192.7 lb/ft .13.5@105mph
BB1 Si Vtec LSD. R.I.P . 1/4mile 14.1451 secs @ 99.71mph
BB4 Si Vtec LSD Turbo . R.I.P
BB4 Si Vtec LSD . 263.4 bhp - 192.7 lb/ft .13.5@105mph
BB1 Si Vtec LSD. R.I.P . 1/4mile 14.1451 secs @ 99.71mph
BB4 Si Vtec LSD Turbo . R.I.P
- Vtecmec
- LotM Winner
- Posts: 5448
- Joined: Fri Aug 06, 2010 5:43 pm
- My Generation: 4G
- XBOX GamerTag: vtecmec
- Location: East Midlands
- Has thanked: 138 times
- Been thanked: 406 times
No temp/fuel gauge and clock
I've not, but the clock is on a separate board from the gauges, which suggests it's not circuitry and there's a power feed issue. Couple that with the non start and it could be as simple as a fuse blown somewhere or poor earth's.
- vanzep
- Supporter 2016
- Posts: 7053
- Joined: Sun Jan 29, 2012 6:38 pm
- My Generation: 4G
- Location: Edinburgh
- Has thanked: 274 times
- Been thanked: 451 times
No temp/fuel gauge and clock
I had this recently - flat battery and alternator packed in. Temp/Fuel guage section went first and then speedo.
May be same issue so check voltage at alternator
Could be down being damp - you could always take the guages out and check them over
May be same issue so check voltage at alternator
Could be down being damp - you could always take the guages out and check them over
1996-2000 1993 EG9 Blue Civic 1.6 Vti - Traded in against the BB4
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD
2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD
2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC
- Drax
- Moderator
- Posts: 6314
- Joined: Wed Dec 22, 2010 4:05 pm
- My Generation: 4G
- Location: Wrexham, North Wales
- Has thanked: 23 times
- Been thanked: 412 times
No temp/fuel gauge and clock
this. if the car now starts ok it's likely damp as the water drains off the inner front screen onto the Temp/Fuel gauge circuit, mine suffers from this most years. once run a few times to warm up and dry they should re-appear
2.2 JDM DOHC SI-VTEC LSD TCS 4WS ABS BB1 MANUAL 1992
FOR PAUL
FOR PAUL
- JEBB4
- Supporter 2014
- Posts: 1239
- Joined: Tue Feb 18, 2014 7:28 pm
- My Generation: 5G
- Location: Australia
- Has thanked: 89 times
- Been thanked: 75 times
No temp/fuel gauge and clock
Does it crank but not fire? Do you have good bright guage lights? Flat battery? The gauges used to go down regularly on my bb2 and would randomly come to life.. the clock is on a separate circuit though as Vtecmec says, so if that’s down it could be a fuse or relay sticking due to lack of use… old car problems
My BB6 buildJamie P 2013 wrote:i like tits
viewtopic.php?f=17&t=54187
My BB2 build (yang)(WRITTEN OFF AND SOLD)
viewtopic.php?f=17&t=18866
My BB4 build (yin) (SOLD TO DRAX)
viewtopic.php?f=17&t=12087&hilit=JEBB4+ ... ty#p203321