Thermoisolated gaskets

imkerya · Post by **imkerya** » Sat Jan 20, 2018 2:53 pm

For a year now I have been making thermo-insulating gaskets for myself and my friends and my friends on Hondas. The material is excellent, not counterfeit, analogous to Hondata. it is also used in the Belarussian military and medical industry. Thickness 3mm (more and not necessary, factory studs may not be enough)
I can offer you to make 100% prepayment a certain number of sets with the subsequent sending to GB.
I also have an account on ebay and a possibility to pay via paypal.
I have all the drawings of the gasket on the H22A motors (manifold, throttle, IAB)

Order list:
1)....
2)..
....

Post by **vanzep** » Sat Jan 20, 2018 5:17 pm

Ive bought a few tb and im thermal gaskets in the last year or so.
I got them off ebay - they were a lot cheaper than Hondata ones but more expensive than the Genuine Honda Paper gaskets.
I dont think demand will be very high but it might be worth while putting up a post in the Group Buy section along with pics and some idea of price.

If you did these gaskets for B series motors you might find demand is higher as there are a lot more Civics on the road

imkerya · Post by **imkerya** » Sat Jan 20, 2018 10:08 pm

You are right, prelude rarely occurs than civics..
Soon I plan to lay out the gaskets as a commodity on ebay..
But it's easier for me to make a lot of 10 pieces and sell you in GB than send one.
I can offer a set of 30$ (tb(60 or 63 mm) and manifold (p13 or pde head) for.
if you collect 10 people

i can make for b\d\k series gaskets

ALso if there are no people willing to assemble in the group for purchase, write to me in private messages, I can sell at a little more price set

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Sun Jan 21, 2018 12:37 pm

Thing to offer, well done for posting up.

Post by **Vtecmec** » Sun Jan 21, 2018 8:52 pm

I'd be interested, though I'd also be wanting the iab gaskets too, can you do that?

imkerya · Post by **imkerya** » Mon Jan 22, 2018 12:18 am

Vtecmec wrote:I'd be interested, though I'd also be wanting the iab gaskets too, can you do that?

Certainly, i have IAB gasket blueprints too.

But it will be a bit expensive in order:
- tb = 10$
- manifold = 20$
- iab x1 = 15$

This prices for people group - 8 orders or more

if anyone want to hit in order list, please pm me what you want (for ex:
- tb 60mm stock P13(h22a black top) \ tb 63mm PDE(h22a7,euro-r) \ tb 63mm P5P(h22a8)
- manifold (p13 head \ pde head)
- iab (1 or 2)
)
when we dial 8-10 people, someone should be responsible for payment and receipt of delivery (I can send by mail or EMS)