Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<
>>> Click Here For Profile <<<
PRELUDE PICKUP she's gone.
- Ted
- Posts: 2765
- Joined: Sat Jan 18, 2014 5:44 pm
- My Generation: 4G
- Location: about 26 miles away from where I was
- Been thanked: 3 times
PRELUDE PICKUP she's gone.
Uploaded with ImageShack.us
well there it is as i got it off ebay from bristol for the princely sum off £225 and enough fuel in it to drive it home all be it with no mot
got out the tape measure a pile of tape to mask off areas i wanted to cut away and find my lines and started hacking away.
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
after a few hours of cutting it was time to dig the welder out and start to put a bit of shape to things.
Uploaded with ImageShack.us
i wanted to use as little filler as possible to avoid cracks so where i could just weld it and grind back i did.
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
so having put a bit of strength back into the back end hopefully it isn't going to fold in the middle or hit you in the back of the head should a rear end shunt occur.
while we are here cutting the rear lights was a piece of cake with a 1mm slitting disc and a tidy up with a flap wheel, reseal with some windscreen bonding and fannys your aunt.
Uploaded with ImageShack.us
i appear to be missing the photos of the rest of the extra strenghth that went in and the sheeting of the back
Uploaded with ImageShack.us
bodywork wise the car was solid and quite straight with a few small dents here and there and a scab or 2 on the sunroof, 1 patch of welding to be done under the drivers side sil cover about 2x3 inches being the only real rot.
Uploaded with ImageShack.us
just visible in this photo.
Uploaded with ImageShack.us
a nice bright orange with some carbon fibre was the colour of choice until an orange and black prelude appeared on ebay the night i painted this on
Uploaded with ImageShack.us
here's where the headache started, the stuff i used to clad the top of the pickup with is an aluminium/plastic composite and it expands in the sun at an allarming rate and kept cracking on the edge
after about 10 attempts to stop it i gave up and came up with the roll bar to hide what i knew would happen again.
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
the lip all around the edge will hide the crack that keeps appearing, its all sealed again with bonding so it wont rust where it cracks as the bonding will just stretch and shrink back.
so off to the paint shop next for a coat of yellow rather than the orange i loved, painted by C N BODYSHINE a local firm ran by a mate and his father they did a stunning job and i can't thank them enough.
Uploaded with ImageShack.us
Uploaded with ImageShack.us
all i have to do now is build it back up
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
i cut the rear and rear side windows from a sheet of bronze tinted poly carb, edged the inside in a black window primer and bonded them in, look perfect
the headlights looked terrible so i covered them in some fly eye but the lights from the ukdm one i have will be going in 1 day.
Uploaded with ImageShack.us
and the sign writing, not to everybodys taste i know but i built it as an advert for the garage and it's certainly done its job.
Uploaded with ImageShack.us
Uploaded with ImageShack.us
i have a few niggles with it, boot leaking water where i havent fitted the seal, haven't finished the interior at the rear, painted the wheels satin when i should have done them gloss, rear lights get fogged up from a pinhole somewhere but other than that its all turned out fine.
will i ever get the turbo fitted ?
will i ever peel the sign writing off ?
will i stop using it for picking up 8x4 sheets of ply ?
will i stop filling it with scrap to weigh in ?
i didnt build it as a show car but it turned out very nice indeed, it seems a shame to risk wrecking it using it as a work horse but i just love driving it.
it turns heads where ever it goes and attracts the sort of attention on the local bypass you cant help grin to yourself about as it leaves the local idiots reaching for 3rd gear as you disapear into the distance.
personally i love it
Last edited by Ted on Fri Dec 23, 2016 2:07 pm, edited 7 times in total.
if it aint broke don't fix it https://www.facebook.com/pages/tram-roa ... 8502699270
- ddoubledanny
- LotM Winner
- Posts: 1016
- Joined: Fri Jan 27, 2012 8:24 pm
- My Generation: 4G
- PSN GamerTag: Ddoubledanny
- Location: Kettering
- nucleustylzlude
- Moderator
- Posts: 4010
- Joined: Wed Aug 11, 2010 11:46 pm
- My Generation: 4G
- Location: Bristol, UK!
- Been thanked: 3 times
- Contact:
- Ted
- Posts: 2765
- Joined: Sat Jan 18, 2014 5:44 pm
- My Generation: 4G
- Location: about 26 miles away from where I was
- Been thanked: 3 times
Re: THE prelude pickup
if i don't get a box before long it wont be going to japfest
if it aint broke don't fix it https://www.facebook.com/pages/tram-roa ... 8502699270
- rob quilter
- Supporter 2014
- Posts: 5331
- Joined: Mon Aug 09, 2010 1:40 pm
- My Generation: 5G
- PSN GamerTag: robquilter
- Location: Derby
Looks awesome
PERFORMANCE PARTS FOR JAPANESE CARS - http://WWW.TOKYOSQUAD.COM
FOLLOW US ON FACEBOOK - http://WWW.FACEBOOK.COM/TOKYOSQUAD
FOLLOW US ON FACEBOOK - http://WWW.FACEBOOK.COM/TOKYOSQUAD
- Ted
- Posts: 2765
- Joined: Sat Jan 18, 2014 5:44 pm
- My Generation: 4G
- Location: about 26 miles away from where I was
- Been thanked: 3 times
Re: THE prelude pickup
it is awesome lolrob quilter wrote:Looks awesome
if it aint broke don't fix it https://www.facebook.com/pages/tram-roa ... 8502699270
- Ted
- Posts: 2765
- Joined: Sat Jan 18, 2014 5:44 pm
- My Generation: 4G
- Location: about 26 miles away from where I was
- Been thanked: 3 times
Re: THE prelude pickup
needing an auto box if anybodys got one not too far away from me within the next couple of weeks so as to get the old girl to castle combe.
BE WARNED if i don't find 1 i will be there in the hairdressers mr2 and we don't want that on the honda stand do we
BE WARNED if i don't find 1 i will be there in the hairdressers mr2 and we don't want that on the honda stand do we
if it aint broke don't fix it https://www.facebook.com/pages/tram-roa ... 8502699270