Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<
>>> Click Here For Profile <<<
eDaniel 4th gen project
- eDaniel
- LotM Winner
- Posts: 633
- Joined: Mon May 28, 2012 7:44 pm
- My Generation: 4G
- Location: Sofia, Bulgaria (Guildford, Surrey)
- Contact:
Re: eDaniel 4th gen project
Yes, a couple of friends offered their help. I'm grateful for that.
So, after some discussions about what should I do, I decided to go this way:
- replace the bonnet
- replace the small triangular side window because of the broken weatherstrip
- replace the side windows' weatherstrips (duh, I imported my perfect set from the UK just an year ago and now they are broken)
- repair all dents
- remove the antenna and fill the gap
- remove the rear windshield spray nozzle and fill the gap
- respray the whole car
By the way, I'm looking for a good red pearl color similar to the original one which is Cassis Red Pearl (R-82P I think). If someone knows a good red peal color, please let me know
Thanks,
Daniel
So, after some discussions about what should I do, I decided to go this way:
- replace the bonnet
- replace the small triangular side window because of the broken weatherstrip
- replace the side windows' weatherstrips (duh, I imported my perfect set from the UK just an year ago and now they are broken)
- repair all dents
- remove the antenna and fill the gap
- remove the rear windshield spray nozzle and fill the gap
- respray the whole car
By the way, I'm looking for a good red pearl color similar to the original one which is Cassis Red Pearl (R-82P I think). If someone knows a good red peal color, please let me know
Thanks,
Daniel
- mercutio
- LotM Winner
- Posts: 14958
- Joined: Sun Aug 08, 2010 8:45 pm
- My Generation: 5G
- Location: Sunny Manchester
- Has thanked: 1 time
- Been thanked: 3 times
- Contact:
I think peugout diablo red is a pearl
bristol_bb4 wrote:ahhh a 5th gen, i love 5th gens
Dino wrote:I loves the 5th gen really.... just dont quote me on it...
4thgenphil wrote:Mines 4 1/4 unches mate, sorry
http://www.ludegeneration.co.uk/profile ... -t618.html
- eDaniel
- LotM Winner
- Posts: 633
- Joined: Mon May 28, 2012 7:44 pm
- My Generation: 4G
- Location: Sofia, Bulgaria (Guildford, Surrey)
- Contact:
Re: eDaniel 4th gen project
After the hailstorm damage...
The color is Pomegranate Red Pearl, but it needs direct sunlight to shine in its full glory
Here is a closeup under better sunlight:
And the heart:
There is a lot more information to share, but I will do it when it's all finished (in a month, hopefully).
The color is Pomegranate Red Pearl, but it needs direct sunlight to shine in its full glory
Here is a closeup under better sunlight:
And the heart:
There is a lot more information to share, but I will do it when it's all finished (in a month, hopefully).
- NafemanNathan
- LotM Winner
- Posts: 20144
- Joined: Sun Aug 08, 2010 9:37 pm
- My Generation: 0G
- Location: Yeovil, Somerset
- Has thanked: 8 times
- Been thanked: 123 times
- mercutio
- LotM Winner
- Posts: 14958
- Joined: Sun Aug 08, 2010 8:45 pm
- My Generation: 5G
- Location: Sunny Manchester
- Has thanked: 1 time
- Been thanked: 3 times
- Contact:
verrrrrrrrrrry nice
bristol_bb4 wrote:ahhh a 5th gen, i love 5th gens
Dino wrote:I loves the 5th gen really.... just dont quote me on it...
4thgenphil wrote:Mines 4 1/4 unches mate, sorry
http://www.ludegeneration.co.uk/profile ... -t618.html
- eDaniel
- LotM Winner
- Posts: 633
- Joined: Mon May 28, 2012 7:44 pm
- My Generation: 4G
- Location: Sofia, Bulgaria (Guildford, Surrey)
- Contact:
Re: eDaniel 4th gen project
Thanks
Only the crankshaft is the original one. Everything else in the engine has been upgraded/replaced. I'm currently driving the car carefully to break-in the clutch and the engine. I will leave the lude at Extreme Tuning in two weeks for the final upgrades including 76mm exhaust system, turbo manifold, oil catch tank upgrade and turbocharger installation, plus some other minor things.
The car will look as stock as possible. The intercooler is already installed and is painted in matte black. The blow-off valve will discharge in the intake system and the wastegate will discharge in the exhaust system. Everything will be in "ninja" mode
Only the crankshaft is the original one. Everything else in the engine has been upgraded/replaced. I'm currently driving the car carefully to break-in the clutch and the engine. I will leave the lude at Extreme Tuning in two weeks for the final upgrades including 76mm exhaust system, turbo manifold, oil catch tank upgrade and turbocharger installation, plus some other minor things.
The car will look as stock as possible. The intercooler is already installed and is painted in matte black. The blow-off valve will discharge in the intake system and the wastegate will discharge in the exhaust system. Everything will be in "ninja" mode
- NafemanNathan
- LotM Winner
- Posts: 20144
- Joined: Sun Aug 08, 2010 9:37 pm
- My Generation: 0G
- Location: Yeovil, Somerset
- Has thanked: 8 times
- Been thanked: 123 times