Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<
>>> Click Here For Profile <<<
Breaking 1998 jdm si 2.2 auto non vtec
-
- Posts: 44
- Joined: Fri Feb 24, 2017 4:50 pm
- My Generation: 5G
- benthebratt
- Posts: 326
- Joined: Thu Jan 15, 2015 10:57 am
- My Generation: 5G
- XBOX GamerTag: BAD BOY B3N
- PSN GamerTag: benthebratt
-
- Posts: 44
- Joined: Fri Feb 24, 2017 4:50 pm
- My Generation: 5G
Re: Breaking 1998 jdm si 2.2 auto non vtec
I need rear break guards are they in any good condition ? Can you send a pic or post it here
-
- Posts: 44
- Joined: Fri Feb 24, 2017 4:50 pm
- My Generation: 5G
-
- Posts: 44
- Joined: Fri Feb 24, 2017 4:50 pm
- My Generation: 5G
- RattyMcClelland
- Moderator
- Posts: 9204
- Joined: Wed Aug 04, 2010 10:02 pm
- My Generation: 5G
- PSN GamerTag: RattyMcClelland
- Location: Leicestershire
- Been thanked: 193 times
Hi @gmpreludeni[
I need the air conditioning thermostat. It's located under the dash behind the glove box in the large black box. Several 10mm bolts to remove and 1 electrical plug on the right lower of the box.
The electrical plug should be 2pin. Can you confirm before removing it. If it's 3 pin it's no use.
I think jdms were 2 pin and uk/usa 3 pin.
I need the air conditioning thermostat. It's located under the dash behind the glove box in the large black box. Several 10mm bolts to remove and 1 electrical plug on the right lower of the box.
The electrical plug should be 2pin. Can you confirm before removing it. If it's 3 pin it's no use.
I think jdms were 2 pin and uk/usa 3 pin.
-
- Posts: 44
- Joined: Fri Feb 24, 2017 4:50 pm
- My Generation: 5G
Sorry for super slow response have been preoccupied with moving house only back onto forum today.RattyMcClelland wrote:Hi @gmpreludeni
I need the air conditioning thermostat. It's located under the dash behind the glove box in the large black box. Several 10mm bolts to remove and 1 electrical plug on the right lower of the box.
The electrical plug should be 2pin. Can you confirm before removing it. If it's 3 pin it's no use.
I think jdms were 2 pin and uk/usa 3 pin.
Car has been scrapped couldn't keep it at time of moving