Jdm 4TH GEN 1993 2.2 VTEC Auto - car now gone

sol-lude · Post by **sol-lude** » Fri Apr 07, 2017 2:20 pm

Nick the PS pipes and cooler on this look like they are in decent condition can you confirm and PM me a price?

Post by **vanzep** » Fri Apr 07, 2017 8:06 pm

firstlude wrote:hi vanzep are you breaking the engine down as i might need some parts off it to put my h22a5 into my 4th gen

not 100% sure as the engine only has 70k on it mated to an auto box - i think id best keep in one piece either to keep or sell on as a whole. I will let you know if that changes.

Post by **vanzep** » Fri Apr 07, 2017 8:09 pm

sol-lude wrote:Nick the PS pipes and cooler on this look like they are in decent condition can you confirm and PM me a price?

well spotted - i will get a look at it tomorrow and let you know.

i have to say i havent really had a good look at this car or take any decent pics - just been busy working on other ludes

will put that right tomorrow

Post by **vanzep** » Sat Apr 08, 2017 5:22 pm

had a better look at this lude today - very,very solid shell

loads of pics

shell looks like it has been undersealed on import. shocks are kyb super specials and look to be damper adjustable

wing mirrors have been hydro dipped...

this could be turned into a track car. colour code is NH561P phantom grey pearl.

piotr__pit · Post by **piotr__pit** » Mon Apr 17, 2017 1:05 pm

hi, im need help, can you help me?
my sills:

dou you cut you prelude?

piotr__pit · Post by **piotr__pit** » Mon Apr 17, 2017 1:10 pm

and loking this in 100% good condition:

rights side, With the whole corner:

left side:

Post by **vanzep** » Mon Apr 17, 2017 4:15 pm

I have a passenger side (left) window trim strip with the blue clips £35 or £30 without blue clips. 90% good couple of small marks & scratches which could possibly be polished out.

not sure if i can help you with the sills - i could sell you the whole body shell

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Mon Apr 17, 2017 8:51 pm

drokk me that shell is in mint condition.
Crying shame to scrap it

piotr__pit · Post by **piotr__pit** » Mon Apr 17, 2017 9:53 pm

window trim strip I have the same condition :/

Right door gasket has a horn?

I'm from Poland, too far

But sills like what I'm interested in is the 100%. Without it hardly fix me my BB1 USDM

I will be waiting for information from you.

Post by **vanzep** » Tue Apr 18, 2017 3:32 pm

Hi piotr - im sorry but i cant help you - i dont have any cutting equipment and id rather keep the shell in one piece.

wurlycorner wrote:drokk me that shell is in mint condition.
Crying shame to scrap it

I dont want to scrap it - you can still see the factory welds on the inside lip of the arch