Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<
>>> Click Here For Profile <<<
Tons of 4th gen goodies - ESP Traction Bar + mounts, Wings West, PLM Header, P28 ECU,
-
- Posts: 214
- Joined: Sun Nov 26, 2017 9:50 pm
- My Generation: 4G
- Has thanked: 2 times
- Been thanked: 15 times
Tons of 4th gen goodies - ESP Traction Bar + mounts, Wings West, PLM Header, P28 ECU,
Hey guys. So my Prelude days have ended, and I wanted to post up some of the items I have had laying around. My brother did take some of the goodies for his own build, but theres still plenty left:
Everything is located in Denmark, and I can of course ship everything to the UK.
Price is in pounds.
Nostrils = £25
Clear JDM headlights (Needs polishing, but in good condition otherwise) = £100 Now £85
Cold air intake with KN filter = £60
Tweeter cover = £10
Tweeter cover with wiper switch = £15
Fog lights clear with 3D printed covers that needs primer and paint = £120
Honda Emlems red = £15
Blue lug nuts x16 = £6
Red battery cover = £5
Vtec solenoid cover = £5
Amber covers = £10
Amber blinker lights = £10
Red screws = £8 for the lot
Orange Screws = £5 for the lot
Red Radiator holders = £5
PLM Tri-Y Header 4-2-1 design = £350 (Hasnt been used a whole lot, just had it lying on the shelf) Now £325 Now £300
M2 Motorsports Decat pipe = £50 Now £40
No-name resonater = $40 Now £30
Mud flaps = £15
Fuel and temperature gauge = £15
Lambda sensor = £25
Nippontoys.PL Strut bar in candy red = £100
ABS Module refurbished = £90
Leather rear divider = £15
Brake calipers front = £25
Brake calipers rear = £20
SRS G55 muffler with SRS midpipe section and M2 Motorsports resonator =£350 Now £300
Wings West replica kit complete, primed and painted in Phantom Sparkling Grey - good condition (Spent over £700 painting, shipping and importing this set) =£400 Now £350
Driveshaft set = £60
Handbrake cables almost new x2 = £10 each
Steering wheel from my 93 2.2 vtec 4ws Prelude. Good general condition, with airbag as well. - £60
Center cover with shift boot red stiching = £15
Middle center console = £15
Front quarter panel right = £60
Front quarter panel left = £60
Rear outer quarter panel repair kit (One has been tried fitted) = £90
Rear Inner 5th gen quarter panel kit (One has been cut, trying to fit) = £90
Gasoline pipe refurbished = £40 Now £25 [
ESP Engine mount kit with rear T-bracket, Silver and black 75A inserts all brand new - re powdercoated as came damaged from shipping =£350 NOW £300 NOW £275
Relay from engine bay = £10
Airbox = £25
Powersteering pump with brand new belt = £35
Generator with brand new belt = £35
Original EUDM Headlighs with corner lights = £50
Sidemirrors x2 x1 = £20 each set 1 set SOLD
Taillights x 2 x1 = £15 each 1 Set sold
Chrome door handles = £35 Now £25
3 way switch = £10
Trunk cable with switch = £5
Fog light rear = £7
Steering column = £7
Xzound Radio = £10
Mugen wool covers = £5
Amber sideblinks x2 x1 = £10 a pair One pair sold
Clear covers = £10
Spacers 5mm = £7
Speedometer with 294k = £10
Airbag = £25 Now £20
P28 ECU with a removable SST Chip = £100 Now £90
P11 ECU = £25
ABS ECU x2 = £15 each
Brake booster refurbished = £35
Front hood lock refurbished = £15
Starter = £20
Rear bumper x2 = £50 each
Front bumper = £50
Plastic covers x2 = £5
Ashika fuel filter = £7
ABS Sensors, FL, FR, RL, RR = £30 each - FL AND FR SOLD
ESP Traction bar in Black with silver logo and aluminum rods. Brand new and imported from USA. (Comes with all mounting hardware and instructions) £350 NOW £300 NOW £275
That should be everything.
Acura KIT will be for sale in a thread for itself.
We can do a deducted price if you pick more than 3 items (Depending on the items).
If you need something not on the list, hit me up, I might have it lying around.
Everything is located in Denmark, and I can of course ship everything to the UK.
Price is in pounds.
Nostrils = £25
Clear JDM headlights (Needs polishing, but in good condition otherwise) = £100 Now £85
Cold air intake with KN filter = £60
Tweeter cover = £10
Tweeter cover with wiper switch = £15
Fog lights clear with 3D printed covers that needs primer and paint = £120
Honda Emlems red = £15
Blue lug nuts x16 = £6
Red battery cover = £5
Vtec solenoid cover = £5
Amber covers = £10
Amber blinker lights = £10
Red screws = £8 for the lot
Orange Screws = £5 for the lot
Red Radiator holders = £5
PLM Tri-Y Header 4-2-1 design = £350 (Hasnt been used a whole lot, just had it lying on the shelf) Now £325 Now £300
M2 Motorsports Decat pipe = £50 Now £40
No-name resonater = $40 Now £30
Mud flaps = £15
Fuel and temperature gauge = £15
Lambda sensor = £25
Nippontoys.PL Strut bar in candy red = £100
ABS Module refurbished = £90
Leather rear divider = £15
Brake calipers front = £25
Brake calipers rear = £20
SRS G55 muffler with SRS midpipe section and M2 Motorsports resonator =£350 Now £300
Wings West replica kit complete, primed and painted in Phantom Sparkling Grey - good condition (Spent over £700 painting, shipping and importing this set) =£400 Now £350
Driveshaft set = £60
Handbrake cables almost new x2 = £10 each
Steering wheel from my 93 2.2 vtec 4ws Prelude. Good general condition, with airbag as well. - £60
Center cover with shift boot red stiching = £15
Middle center console = £15
Front quarter panel right = £60
Front quarter panel left = £60
Rear outer quarter panel repair kit (One has been tried fitted) = £90
Rear Inner 5th gen quarter panel kit (One has been cut, trying to fit) = £90
Gasoline pipe refurbished = £40 Now £25 [
ESP Engine mount kit with rear T-bracket, Silver and black 75A inserts all brand new - re powdercoated as came damaged from shipping =£350 NOW £300 NOW £275
Relay from engine bay = £10
Airbox = £25
Powersteering pump with brand new belt = £35
Generator with brand new belt = £35
Original EUDM Headlighs with corner lights = £50
Sidemirrors x2 x1 = £20 each set 1 set SOLD
Taillights x 2 x1 = £15 each 1 Set sold
Chrome door handles = £35 Now £25
3 way switch = £10
Trunk cable with switch = £5
Fog light rear = £7
Steering column = £7
Xzound Radio = £10
Mugen wool covers = £5
Amber sideblinks x2 x1 = £10 a pair One pair sold
Clear covers = £10
Spacers 5mm = £7
Speedometer with 294k = £10
Airbag = £25 Now £20
P28 ECU with a removable SST Chip = £100 Now £90
P11 ECU = £25
ABS ECU x2 = £15 each
Brake booster refurbished = £35
Front hood lock refurbished = £15
Starter = £20
Rear bumper x2 = £50 each
Front bumper = £50
Plastic covers x2 = £5
Ashika fuel filter = £7
ABS Sensors, FL, FR, RL, RR = £30 each - FL AND FR SOLD
ESP Traction bar in Black with silver logo and aluminum rods. Brand new and imported from USA. (Comes with all mounting hardware and instructions) £350 NOW £300 NOW £275
That should be everything.
Acura KIT will be for sale in a thread for itself.
We can do a deducted price if you pick more than 3 items (Depending on the items).
If you need something not on the list, hit me up, I might have it lying around.
Last edited by DanishLuder on Tue May 18, 2021 7:22 pm, edited 32 times in total.
-
- Posts: 214
- Joined: Sun Nov 26, 2017 9:50 pm
- My Generation: 4G
- Has thanked: 2 times
- Been thanked: 15 times
Tons of 4th gen goodies - Danish Garage Sale
IMgur is having technical difficulties, so pictures have trouble loading. Will fix asap
- Drax
- Moderator
- Posts: 6316
- Joined: Wed Dec 22, 2010 4:05 pm
- My Generation: 4G
- Location: Wrexham, North Wales
- Has thanked: 23 times
- Been thanked: 412 times
Tons of 4th gen goodies - Danish Garage Sale
some brilliant parts here pity your not continuing with lude life
quick question, how wide is the exhaust system please? thanks.
quick question, how wide is the exhaust system please? thanks.
2.2 JDM DOHC SI-VTEC LSD TCS 4WS ABS BB1 MANUAL 1992
FOR PAUL
FOR PAUL
Tons of 4th gen goodies - Danish Garage Sale
Hi there, shame to watch all the stuff go
Would it be possible for you to ship to the Netherlands? I've been lookin for a pair of oem nostrils and mudflaps for a while
Would it be possible for you to ship to the Netherlands? I've been lookin for a pair of oem nostrils and mudflaps for a while
-
- Posts: 214
- Joined: Sun Nov 26, 2017 9:50 pm
- My Generation: 4G
- Has thanked: 2 times
- Been thanked: 15 times
Tons of 4th gen goodies - Danish Garage Sale
Decided it was time to try something different, now that my journey with my old Lude had come to a sudden end.. Might come back though, you never know *
PLM Manifold is with a 2.5inch collector - Rest is roughly 2.25 inner diameter, out until the SRS G55 - which has a bigger outer diameter.
Last edited by DanishLuder on Wed Nov 25, 2020 5:14 pm, edited 1 time in total.
-
- Posts: 214
- Joined: Sun Nov 26, 2017 9:50 pm
- My Generation: 4G
- Has thanked: 2 times
- Been thanked: 15 times
Tons of 4th gen goodies - Danish Garage Sale
Yes, I can ship basicly everywhere.
Will pack it nicely as not to get damaged.
Want me to get a quote for the lot packed together?
- km666
- Posts: 133
- Joined: Mon May 06, 2019 1:07 pm
- My Generation: 5G
- PSN GamerTag: fargoneonone
- Location: Devon
- Has thanked: 56 times
- Been thanked: 15 times
Tons of 4th gen goodies - Danish Garage Sale
Interested in the PLM manifold, not much difference fitment wise between 4th and 5th gen?
-KM666
Tons of 4th gen goodies - Danish Garage Sale
Great to hear, if you could do that and also include the tweeter cover with fog light switch and the fog lights with the 3d printed covers you'd make me a happy luder
-
- Posts: 214
- Joined: Sun Nov 26, 2017 9:50 pm
- My Generation: 4G
- Has thanked: 2 times
- Been thanked: 15 times
Tons of 4th gen goodies - Danish Garage Sale
To my knowledge, there should be no fitment issues.
Only real issues they face, is with the standard traction bar on the 4th gens, where it is recommended to either hack a notch or buy an aftermarket one.
-
- Posts: 214
- Joined: Sun Nov 26, 2017 9:50 pm
- My Generation: 4G
- Has thanked: 2 times
- Been thanked: 15 times
Tons of 4th gen goodies - Danish Garage Sale
I'll get a complete quote for you regarding following items:
Tweeter covers with foght light switch:
Fog lights with 3D printed covers
Nostrils
Mudflaps
Could you please message me your info and address, then I can get a more precise quote.