hello from emamos

emamos · Post by **emamos** » Wed Apr 28, 2021 4:56 pm

hello from Italy, I have a prelude 4gen 94 without ac, with h22a jdm with euro-r head and junauto cams and springs+single stage intake euro-r+type-s airbox ,gearbox u2q7 with lsd, ecu p13 jdm,front brake caliper from honda legend coupè 94 .i am preparing the material to add 4ws to the car. i have all the wiring and manual diagrams, n2 rear actuator+arms, sensors,steering rack 4ws. i am just missing some connectors,and rear cross suspension 4ws.I will do a test run on the bench, then I will mount everything on the car.I hope to make everything work!

toadster · Post by **toadster** » Wed Apr 28, 2021 6:18 pm

Hi

Welcome to LG

Good luck with Your build

Cheers

Toadster

Post by **Vtecmec** » Wed Apr 28, 2021 9:00 pm

4ws is epic and a good upgrade.

Do you have Abs?

emamos · Post by **emamos** » Thu Apr 29, 2021 7:02 am

yes, with abs!!

Post by **Vtecmec** » Thu Apr 29, 2021 8:10 am

Cool, that makes matters easier, I'm sure you've spotted that the rear sensors are shared on the two systems and the signal passes through the ABS ecu before going to the 4Ws ecu. I mention this because it may make bench testing the system impossible.

Best of luck with the project on a car which already reads as well upgraded.

emamos · Post by **emamos** » Thu Apr 29, 2021 2:49 pm

I have another abs control unit for 4ws with code 39790-ss0-a61.I miss the connectors for 4ws control unit, abs control unit, actuator, .. sooner or later I will find them around the world on ebay !!

Post by **Vtecmec** » Thu Apr 29, 2021 4:44 pm

Sweet.