Off Side REAR Track Rod End (5th Gen)

pidda1 · Post by **pidda1** » Sat Jan 29, 2022 8:00 pm

Evening everyone, I'm wondering if some one can help me out. I've got slight play in my off side rear track rod end, and the garage I took it to, says they can't get one to replace it. After some online searching I'm starting to think they're right.

Has anybody got any ideas where I could get one?

Or what my options are if I can't get one?

Thanks loads.

Post by **Drax** » Sat Jan 29, 2022 8:07 pm

is this for a 5th gen lude matey?

pidda1 · Post by **pidda1** » Sat Jan 29, 2022 8:09 pm

It is pal, I should've said that!

Post by **Drax** » Sat Jan 29, 2022 11:48 pm

https://www.amayama.com/en/part/honda/52359s30003
this one?

pidda1 · Post by **pidda1** » Sun Jan 30, 2022 10:18 am

Thanks for sending me this, I sent it over to my mechanic and he seems to think it isn't the bit he needs. He says he thinks that's for a one without 4WS. I'd love to know if you or anyone else on here knows different.

Max · Post by **Max** » Sun Jan 30, 2022 11:04 am

I believe the part number you are after is 53550-SS0-J61 and sadly it looks like this is no longer available even from Japan.

https://www.amayama.com/en/part/honda/53550ss0j61

I think your only real option is to have the existing ones rebuilt, i didnt know this was even a thing but Anzezaf had this done, have a read of his bullet pointed post, point 3.

viewtopic.php?f=6&t=24779&p=363114#p363114

pidda1 · Post by **pidda1** » Sun Jan 30, 2022 1:26 pm

That's really helpfull, thank you.

Post by **Pushki** » Sun Jan 30, 2022 3:29 pm

Check these guys out. They may have what you need.

https://www.rockauto.com/

pidda1 · Post by **pidda1** » Sun Jan 30, 2022 10:01 pm

They don't seem to Pushki, I'll bookmark the site though, might come in the something else I need in the future. Thanks.

Post by **Drax** » Mon Jan 31, 2022 8:39 am

i wonder if these would fit - drop link from a 4g but seems very similar in fitment
https://www.ebay.co.uk/itm/252377924077 ... xy1klRZQnK