Prelude Remapped chips-JDM Spoon V2 Auto/Manual+UKDM+Chrome+

Hagland-BB4 · Post by **Hagland-BB4** » Thu Mar 04, 2021 6:23 pm

What chips will i need for a 1995 BB1 ukdm and a 1994 BB4 jdm.
I done this years ago but there are more chips now so not sure which ones to buy.
Thanks

Hagland-BB4 · Post by **Hagland-BB4** » Sat Mar 06, 2021 5:24 pm

anyone?

TitzonToast · Post by **TitzonToast** » Thu Jul 29, 2021 12:45 am

@ the OP.

Are you still supplying these please? I'm at the point where I need a new ECU to make use of the mods I've done and some others I have there to bolt on.

Post by **Drax** » Thu Jul 29, 2021 8:43 am

@Hagland-BB4
1995 BB1 ukdm (second chip) - while this chip fits a UKDM ECU, it is very specific. It will only fit UK ECU’s with the ECU sticker part number ending in ‘G00’
1994 BB4 jdm (first chip) - this will run fine

@TitzonToast
ill chase up Rob now who supplies these for you

TitzonToast · Post by **TitzonToast** » Thu Jul 29, 2021 1:28 pm

Much appreciated. Thank you very much.

wllm · Post by **wllm** » Sun Oct 03, 2021 9:31 pm

Not sure if this is the right thread

Currently my prelude runs on an P28 with Neptune RTP but for archiving purposes I dumped the rom from my EDM P13 (37820-P13-G00). An unknown tune for an H22a2. It has a key101 "protection". I dumped the eeprom with key101 attached with an Xgecu T56 programmer. Maybe it's useful for someone and I'm also interested in the changes compared to the stock rom.

I would not advise anyone to just burn this rom and go with it, maybe if you are skilled you could have a look at it

the engine was blown where this ecu came from so....

https://pw12.nu/STATIC/prelude/p13chip/AM27C512_32.bin

Luderbrit · Post by **Luderbrit** » Tue Feb 06, 2024 7:27 pm

my 4g Lude was a f20a4 engine and now has a H22a1 fitted the car is a BB3 ukdm which had a P11 ecu, I have the choice of two ecu's a p27 and a p13 G01 what would the best ecu to fit and what chip to use. NB. the ecu harness on the ukdm is different pinout to the usdm and jdm, iv'e added in the vtec and knock sensor wires which weren't on my f20 harness

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Tue Feb 06, 2024 8:30 pm

@Drax were you ever able to speak with Rob?

Post by **Drax** » Wed Feb 07, 2024 8:57 am

wurlycorner wrote: ↑
Tue Feb 06, 2024 8:30 pm
@Drax were you ever able to speak with Rob?

i did at the time, he said he'd take a look but im guessing it passed him by. i can chase him again