Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.

>>> Click Here For Profile <<<

Image

Introduction

PerformanceAutoworks
Posts: 259
Joined: Mon Jan 30, 2012 9:24 am
My Generation: 4G
Location: Fairford, Glos
Has thanked: 4 times
Been thanked: 3 times
Contact:

Introduction

Post by PerformanceAutoworks » Wed Feb 01, 2012 9:32 am

Well that's the Performance Autoworks section setup and ready for action 8-)

Just so everyone is aware who I am (we are) -

My name is Rich (personal log on Buzzonion Vtec) and I am the co-owner of Performance Autoworks.
We are specialists in all things Mitsubishi and Honda (and plenty of other Jap metal too), my own personal vice is the mighty Prelude so you can be sure that you're all in safe hands with me ;)
Just to show I'm not just "saying that" here's my own Prelude - Profile and Build thread

I have over 20 years of Honda experiance and have been working with the mighty H block since it's introduction so I'd like to think there isn't much I haven't done with these motors - that's not to say that I'm not always trying out and learning new things mind you ;)

I'm not one for blowing our own trumpet but there are plenty of members on here that have used us and I like to think it's always been the experiance they'd hoped for.
No jobs are too big or in fact too small so if you want something done then just shout. We cover everything from basic minor servicing, "fast road" upgrades, full geometry setups, repairs and full race car builds and have great in depth knowledge about what makes these cars tick, what works as upgrades and what not to waste your money on.

We can supply parts from a great number of manufacturers, some examples below but please not this is not a complete list!!
Suspension Systems - Tein, Meister-R, Eibach, Koni, Skunk2, Spax
Poly Bush Kits - Energy Suspension, Superflex and Powerflex
Brake systems/parts - Ferodo, Mintex, Performance Friction, Stop Tech
Engine parts - Skunk2, Supertech, Mahle, ACL, Carillo, Manley, Cosworth, Wiseco
Clutch/Flywheel - ACT, Competition Clutch, Exedy
Transmission - KAAZ, M-Factory, Wavetrac

We can also supply OEM, Blueprint and BGA parts at competitve prices


Rest assured we are not here just to make a fast buck, we are here to help out where we can as I am sure many members already know. Obviously we can't be on the forum all day every day due to workshop commitments but I usually have at least a morning scan through to see if help is needed out there in thread land.

Bookings, enquiries etc can be made in one of 3 ways
PM on here - username - PerformanceAutoworks
e-mail - [email protected]
or good old fashioned phone - 01285 711733

Our address as follows

Unit 13 Horcott Ind Est,
Horcott Road,
Fairford,
Glos
GL7 4BX

Website - http://www.Performance-Autoworks.co.uk - a map can be found on contacts page.
The website is long overdue for an upgrade which thankfully will be happening soon



We will be posting up special offers from time to time, this might be geometry specials, clutch deals or service special for example so keep your eye out for those and take advantage of them.
Oh and one other bit of good news is that we will continue to support the Prelude community by offering 10% off labour to all Lude Generation members - just mention you're a member and your forum name.
Last edited by PerformanceAutoworks on Sun Feb 05, 2012 3:18 pm, edited 2 times in total.
Image

User avatar
Shiny
Posts: 1972
Joined: Sun Aug 08, 2010 4:15 pm
My Generation: 0G
Location: Sunny Swindon
Has thanked: 2 times
Been thanked: 11 times

Post by Shiny » Wed Feb 01, 2012 10:01 am

I'm sure I'll be the first of many to confirm what top chaps (& lasses, Sam :mrgreen: ) they are down at PA.

Very helpful, honest and masters of the spanner. Finding a good mechanic to trust can be a difficult task sometimes these days, but i have every confidence in PA and would recommend them to any forum member. [insert thumb smiley here]
Image

User avatar
JayJay
Posts: 2190
Joined: Thu Jul 01, 2010 9:21 pm
My Generation: 4G
Location: Isle of Man

Post by JayJay » Wed Feb 01, 2012 10:07 am

Didn't realise you also sold parts!

Might be an idea to stick your address in there :)
Shiny wrote:I sniff dirty pants.

PerformanceAutoworks
Posts: 259
Joined: Mon Jan 30, 2012 9:24 am
My Generation: 4G
Location: Fairford, Glos
Has thanked: 4 times
Been thanked: 3 times
Contact:

Post by PerformanceAutoworks » Thu Feb 02, 2012 1:15 pm

Thanks for your comments Lloyd 8-)

Cheers Jay, oh yeah, we sell parts a plenty :D
No online shop (as yet) but can supply most things that people need.

First post edited to contain extra info 8-)
Image

User avatar
lewd lude lover
Supporter 2015
Posts: 5658
Joined: Sat Aug 07, 2010 9:51 pm
My Generation: 5G
Has thanked: 25 times
Been thanked: 17 times

Post by lewd lude lover » Thu Feb 02, 2012 1:25 pm

These guys get 110% recommendation from me.

Clean and tidy work shop, professional outlook, great customer service, more knowledge on all things Internal combustion than is probably good for you and a liking for cakes.

what more could you need?

Also runs a badass Race car which wins races. This tells you a lot about the work carried out there and the amount of experience that goes into the job.


:10:
6th gen Prelude please Mr Honda. RWD 2.4 turbo lude.

User avatar
bennyboy
Art Mechanic
Posts: 2825
Joined: Sat Aug 20, 2011 11:59 am
My Generation: 4G
PSN GamerTag: OCbennyboy
Location: St Albans, Herts.
Has thanked: 7 times
Been thanked: 21 times
Contact:

Post by bennyboy » Thu Feb 02, 2012 1:35 pm

I can only echo whats been said above.
I've used these guys for a good few years now and I'm sure people already know how much I recommend them, I harp on about it enough :D

THE Prelude knowledge source as far as I'm concerned, end of.

Rep'd!
UKDM BB1 H22A8 NH561P 244bhp 173lbft

'Nigella'

www.benaskem.co.uk

User avatar
Lude-dude
Moderator
Posts: 2181
Joined: Tue Aug 03, 2010 10:39 pm
My Generation: 5G
XBOX GamerTag: Vtec Junky
PSN GamerTag: Rob7niner
Has thanked: 3 times
Been thanked: 3 times

Post by Lude-dude » Thu Feb 02, 2012 1:40 pm

+ Rep

as said, but always willing to answer questions, sometimes silly ones

and give out sound unbiased advise, I.e not out to bleed you dry

infact I think they enjoy having preludes round to play with :lol:
Image

H22a5 UKDM 2.2 VTI 244Bhp 180lbs/ft Crower stage 2
http://www.ludegeneration.co.uk/profile ... t3211.html

User avatar
NafemanNathan
LotM Winner
Posts: 20144
Joined: Sun Aug 08, 2010 9:37 pm
My Generation: 0G
Location: Yeovil, Somerset
Has thanked: 8 times
Been thanked: 123 times

Post by NafemanNathan » Thu Feb 02, 2012 1:41 pm

Give me a "P"!

User avatar
nucleustylzlude
Moderator
Posts: 4010
Joined: Wed Aug 11, 2010 11:46 pm
My Generation: 4G
Location: Bristol, UK!
Been thanked: 3 times
Contact:

Post by nucleustylzlude » Thu Feb 02, 2012 2:24 pm

/\ :lol:

To be fair, I think most members on here know the Legend that is PA.

+rep (and so should the rest of you :wink: )

User avatar
NafemanNathan
LotM Winner
Posts: 20144
Joined: Sun Aug 08, 2010 9:37 pm
My Generation: 0G
Location: Yeovil, Somerset
Has thanked: 8 times
Been thanked: 123 times

Post by NafemanNathan » Thu Feb 02, 2012 2:36 pm

Don't leave me hanging Rob!

Post Reply

Return to “Performance Autoworks”