Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<
>>> Click Here For Profile <<<
Introduction
-
- Posts: 259
- Joined: Mon Jan 30, 2012 9:24 am
- My Generation: 4G
- Location: Fairford, Glos
- Has thanked: 4 times
- Been thanked: 3 times
- Contact:
Introduction
Well that's the Performance Autoworks section setup and ready for action
Just so everyone is aware who I am (we are) -
My name is Rich (personal log on Buzzonion Vtec) and I am the co-owner of Performance Autoworks.
We are specialists in all things Mitsubishi and Honda (and plenty of other Jap metal too), my own personal vice is the mighty Prelude so you can be sure that you're all in safe hands with me
Just to show I'm not just "saying that" here's my own Prelude - Profile and Build thread
I have over 20 years of Honda experiance and have been working with the mighty H block since it's introduction so I'd like to think there isn't much I haven't done with these motors - that's not to say that I'm not always trying out and learning new things mind you
I'm not one for blowing our own trumpet but there are plenty of members on here that have used us and I like to think it's always been the experiance they'd hoped for.
No jobs are too big or in fact too small so if you want something done then just shout. We cover everything from basic minor servicing, "fast road" upgrades, full geometry setups, repairs and full race car builds and have great in depth knowledge about what makes these cars tick, what works as upgrades and what not to waste your money on.
We can supply parts from a great number of manufacturers, some examples below but please not this is not a complete list!!
Suspension Systems - Tein, Meister-R, Eibach, Koni, Skunk2, Spax
Poly Bush Kits - Energy Suspension, Superflex and Powerflex
Brake systems/parts - Ferodo, Mintex, Performance Friction, Stop Tech
Engine parts - Skunk2, Supertech, Mahle, ACL, Carillo, Manley, Cosworth, Wiseco
Clutch/Flywheel - ACT, Competition Clutch, Exedy
Transmission - KAAZ, M-Factory, Wavetrac
We can also supply OEM, Blueprint and BGA parts at competitve prices
Rest assured we are not here just to make a fast buck, we are here to help out where we can as I am sure many members already know. Obviously we can't be on the forum all day every day due to workshop commitments but I usually have at least a morning scan through to see if help is needed out there in thread land.
Bookings, enquiries etc can be made in one of 3 ways
PM on here - username - PerformanceAutoworks
e-mail - [email protected]
or good old fashioned phone - 01285 711733
Our address as follows
Unit 13 Horcott Ind Est,
Horcott Road,
Fairford,
Glos
GL7 4BX
Website - http://www.Performance-Autoworks.co.uk - a map can be found on contacts page.
The website is long overdue for an upgrade which thankfully will be happening soon
We will be posting up special offers from time to time, this might be geometry specials, clutch deals or service special for example so keep your eye out for those and take advantage of them.
Oh and one other bit of good news is that we will continue to support the Prelude community by offering 10% off labour to all Lude Generation members - just mention you're a member and your forum name.
Just so everyone is aware who I am (we are) -
My name is Rich (personal log on Buzzonion Vtec) and I am the co-owner of Performance Autoworks.
We are specialists in all things Mitsubishi and Honda (and plenty of other Jap metal too), my own personal vice is the mighty Prelude so you can be sure that you're all in safe hands with me
Just to show I'm not just "saying that" here's my own Prelude - Profile and Build thread
I have over 20 years of Honda experiance and have been working with the mighty H block since it's introduction so I'd like to think there isn't much I haven't done with these motors - that's not to say that I'm not always trying out and learning new things mind you
I'm not one for blowing our own trumpet but there are plenty of members on here that have used us and I like to think it's always been the experiance they'd hoped for.
No jobs are too big or in fact too small so if you want something done then just shout. We cover everything from basic minor servicing, "fast road" upgrades, full geometry setups, repairs and full race car builds and have great in depth knowledge about what makes these cars tick, what works as upgrades and what not to waste your money on.
We can supply parts from a great number of manufacturers, some examples below but please not this is not a complete list!!
Suspension Systems - Tein, Meister-R, Eibach, Koni, Skunk2, Spax
Poly Bush Kits - Energy Suspension, Superflex and Powerflex
Brake systems/parts - Ferodo, Mintex, Performance Friction, Stop Tech
Engine parts - Skunk2, Supertech, Mahle, ACL, Carillo, Manley, Cosworth, Wiseco
Clutch/Flywheel - ACT, Competition Clutch, Exedy
Transmission - KAAZ, M-Factory, Wavetrac
We can also supply OEM, Blueprint and BGA parts at competitve prices
Rest assured we are not here just to make a fast buck, we are here to help out where we can as I am sure many members already know. Obviously we can't be on the forum all day every day due to workshop commitments but I usually have at least a morning scan through to see if help is needed out there in thread land.
Bookings, enquiries etc can be made in one of 3 ways
PM on here - username - PerformanceAutoworks
e-mail - [email protected]
or good old fashioned phone - 01285 711733
Our address as follows
Unit 13 Horcott Ind Est,
Horcott Road,
Fairford,
Glos
GL7 4BX
Website - http://www.Performance-Autoworks.co.uk - a map can be found on contacts page.
The website is long overdue for an upgrade which thankfully will be happening soon
We will be posting up special offers from time to time, this might be geometry specials, clutch deals or service special for example so keep your eye out for those and take advantage of them.
Oh and one other bit of good news is that we will continue to support the Prelude community by offering 10% off labour to all Lude Generation members - just mention you're a member and your forum name.
Last edited by PerformanceAutoworks on Sun Feb 05, 2012 3:18 pm, edited 2 times in total.
- Shiny
- Posts: 1972
- Joined: Sun Aug 08, 2010 4:15 pm
- My Generation: 0G
- Location: Sunny Swindon
- Has thanked: 2 times
- Been thanked: 11 times
I'm sure I'll be the first of many to confirm what top chaps (& lasses, Sam ) they are down at PA.
Very helpful, honest and masters of the spanner. Finding a good mechanic to trust can be a difficult task sometimes these days, but i have every confidence in PA and would recommend them to any forum member. [insert thumb smiley here]
Very helpful, honest and masters of the spanner. Finding a good mechanic to trust can be a difficult task sometimes these days, but i have every confidence in PA and would recommend them to any forum member. [insert thumb smiley here]
-
- Posts: 259
- Joined: Mon Jan 30, 2012 9:24 am
- My Generation: 4G
- Location: Fairford, Glos
- Has thanked: 4 times
- Been thanked: 3 times
- Contact:
- lewd lude lover
- Supporter 2015
- Posts: 5658
- Joined: Sat Aug 07, 2010 9:51 pm
- My Generation: 5G
- Has thanked: 25 times
- Been thanked: 17 times
These guys get 110% recommendation from me.
Clean and tidy work shop, professional outlook, great customer service, more knowledge on all things Internal combustion than is probably good for you and a liking for cakes.
what more could you need?
Also runs a badass Race car which wins races. This tells you a lot about the work carried out there and the amount of experience that goes into the job.
Clean and tidy work shop, professional outlook, great customer service, more knowledge on all things Internal combustion than is probably good for you and a liking for cakes.
what more could you need?
Also runs a badass Race car which wins races. This tells you a lot about the work carried out there and the amount of experience that goes into the job.
6th gen Prelude please Mr Honda. RWD 2.4 turbo lude.
- Lude-dude
- Moderator
- Posts: 2181
- Joined: Tue Aug 03, 2010 10:39 pm
- My Generation: 5G
- XBOX GamerTag: Vtec Junky
- PSN GamerTag: Rob7niner
- Has thanked: 3 times
- Been thanked: 3 times
+ Rep
as said, but always willing to answer questions, sometimes silly ones
and give out sound unbiased advise, I.e not out to bleed you dry
infact I think they enjoy having preludes round to play with
as said, but always willing to answer questions, sometimes silly ones
and give out sound unbiased advise, I.e not out to bleed you dry
infact I think they enjoy having preludes round to play with
H22a5 UKDM 2.2 VTI 244Bhp 180lbs/ft Crower stage 2
http://www.ludegeneration.co.uk/profile ... t3211.html
- NafemanNathan
- LotM Winner
- Posts: 20144
- Joined: Sun Aug 08, 2010 9:37 pm
- My Generation: 0G
- Location: Yeovil, Somerset
- Has thanked: 8 times
- Been thanked: 123 times
- nucleustylzlude
- Moderator
- Posts: 4010
- Joined: Wed Aug 11, 2010 11:46 pm
- My Generation: 4G
- Location: Bristol, UK!
- Been thanked: 3 times
- Contact:
- NafemanNathan
- LotM Winner
- Posts: 20144
- Joined: Sun Aug 08, 2010 9:37 pm
- My Generation: 0G
- Location: Yeovil, Somerset
- Has thanked: 8 times
- Been thanked: 123 times