Hi all.
About a month ago I was incredibly excited to purchase a set of leather seat covers from a fellow luder.The seat covers came of a Si spec lude where as mine is a uk spec 2.2 He advised me that the covers would need light restoration. After searching for so long this was never going to be an issue, so I decided to take the covers to a local trimmers and have them take the cloth covers off mine and replace them with the leather ones. Upon collecting them I was disappointed to see that there were plenty of exposed areas of foam. The guy that fitted them assured me that the covers would not fit my seats. My question is, are the leather seats different sizes to the cloth seats or different year seats ie 97 to 01?
Thanks all
Curt
Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<
>>> Click Here For Profile <<<
Leather seats vs cloth seats ?
-
- Supporter 2016
- Posts: 288
- Joined: Mon Jun 30, 2014 8:14 am
- My Generation: 5G
- Location: Wakefield
- Been thanked: 2 times
Hi Curt,
Also just to note that to remove/refit the seat base covers requires removal of the seat base from the frame as parts of the cover need to be secured to the bottom of the base and this can't be done in situ.
Found this out when I took the covers off the seats to send to you. (a real pain it was too!)
Hope this helps,
Pete
Also just to note that to remove/refit the seat base covers requires removal of the seat base from the frame as parts of the cover need to be secured to the bottom of the base and this can't be done in situ.
Found this out when I took the covers off the seats to send to you. (a real pain it was too!)
Hope this helps,
Pete